|
Manufactured in the U.K. by EVANS VANODINE INTERNATIONAL PLC whose Quality
System is registered by THE BRITISH STANDARDS INSTITUTION Cert. of Reg.
No. FM 09535
WHERE TO USE
For use on all colourfast carpets & soft furnishings.
HOW TO USE
Stains
on carpets are usually caused by accidental spillages & should be treated
as soon as possible to avoid the risk of permanent staining. Initially,
please check carpet for colourfastness by rubbing an inconspicuous area
with a white cloth, wet with the product. The cloth should remain unstained.
1. Remove any solid residue. Dried substances should be loosened with
a blunt scraper, then brushed or vacuumed. Liquid spills should be mopped
up with kitchen paper or absorbent cloth.
2. Spray the product onto the stain and leave for upto 60 seconds. Avoid
overwetting.
3. Blot the stain out of the carpet with kitchen paper or an absorbent
cloth.
4. Difficult stains may need a second application or a gentle rub with
a soft brush, working from the outside edge into the centre, to avoid
spreading the stain.
5. Once the stain has been removed, rinse well with clean water & blot
the area completely dry.
6. Vacuum or clean carpet if required.
N.B.
If removing stains from a dirty carpet, especially a light coloured one;
it may be necessary to clean the whole carpet .
COMPOSITION
Contains a blend of Nonionic surfactant, sequestering agent, glycol ether
& perfume.
PACKAGING
6 x 750ml polythene flasks packed in a cardboard carton c/w 6 foaming
trigger sprays fitted.
|
