|
Manufactured in the U.K. by EVANS VANODINE INTERNATIONAL PLC whose
Quality System is registered by THE BRITISH STANDARDS INSTITUTION Cert.
of Reg. No. FM 09535
WHERE TO USE
On all clean, dry, floor surfaces including vinyl, thermoplastic, rubber,
linoleum, composition, asphalt, terrazzo, marble, sealed wood, sealed
cork & sealed concrete. Dependent upon the porosity of the surface, the
coverage rate is approximately 400-500 sq.metres for one coat.
HOW TO USE
Thoroughly
clean floor & allow to dry before applying polish. If the old polish has
been stripped, the floor may require neutralising with dilute acetic acid
(vinegar) - 2 tablespoonsful per 5lt water. Apply a thin coat with clean
mop or applicator. When dry, apply a second coat &, again, allow to dry.
A third coat may be required on old or worn floors. OVACRYL will dry to
a high gloss, but machine burnishing will enhance the appearance, durability
& slip resistance.
MAINTENANCE: For a period of 24 hours after application of OVACRYL,
the floor surface should only be swept or damp mopped, thereafter routine
maintenance should be carried out, as recommended:-
1. Damp mop using HIGH CLASS or suitable neutral detergent.
2. Damp mop with a solution of 1:8 OVACRYL. When dry, machine buff.
3. Remove dust by mop sweeping & spray clean using OVACRYL at a dilution
of 1:50 or, alternatively, use CLEAN & SHINE or a Floor Gel.
PLEASE REFER TO RELEVANT PRODUCT INFORMATION SHEETS
COMPOSITION
Contains an aqueous dispersion of acrylic co-polymers, wax emulsion, ammonia
soluble resin, plasticisers, coalescent, surfactant, defoamer, levelling
agent & preservative.
PACKAGING
4 x 5 litre polythene bottles packed in a cardboard carton.
|
