|
WHERE TO USE
On all clean, dry, floor surfaces including PVC, rubber, vinyl, linoleum,
composition, terrazzo, marble, sealed floor, sealed cork & sealed concrete
floors. As ENHANCE is so durable, it is ideal for busy school classrooms,
hospital corridors & everywhere that extensive traffic is experienced.
Dependent upon the porosity of the surface, the coverage rate is approximately
400-500 sq.metres for one coat.
HOW TO USE
Thoroughly
clean floor & allow to dry before applying polish. If the old polish has
been stripped, the floor may require neutralising with dilute acetic acid
(vinegar) - 2 tablespoonsful per 5lt water. Apply two thin coats with
clean mop or applicator. Allow each coat to dry thoroughly - approximately
30 minutes depending upon humidity & weather conditions. A third coat
may be necessary on old, worn & heavy traffic areas.
MAINTENANCE: For a period of 24 hours after application of ENHANCE, the
floor surface should only be swept or damp mopped. Thereafter, routine
maintenance should be carried out, as recommended:-
1. Damp mop, using HIGH CLASS or similar neutral detergent.
2. Damp
mop, using a FLOOR GEL or CLEAN & SHINE, followed by dry burnishing.
3. Remove dust by mop sweeping and spray clean using CLEAN & SHINE, FLOOR
GEL or approved product.
PLEASE REFER TO RELEVANT PRODUCT INFORMATION SHEETS FOR FURTHER DETAILS.
COMPOSITION
Contains an aqueous dispersion of metallised acrylic co-polymers, wax
emulsion, ammonia soluble resin, plasticisers, coalescent, defoamer, levelling
agent & preservative.
PACKAGING
4 x 5 litre polythene bottles packed in a cardboard carton.
|
