DESCRIPTION
Powerful, highly effective floor polish stripper developed to remove all emulsion polishes with or without the use of a floor-scrubbing machine. It is a sodium metasilicate free formulation which ensures a much lower pH than similar products, thus eliminating the need to neutralise prior to re-coating with polish. Especially effective in the stripping of heavy polish build-up, particularly around skirting boards & stairways where machine access may be limited. Highly recommended for use in a spray strip system, using a high-speed floor machine & an appropriate floor pad. Suitable as a conventional polish stripper when used in conjunction with a standard speed scrubbing machine.

BENEFITS AND FEATURES
Does NOT contain ammonia or sodium metasilicate * Powerful & concentrated * Multi purpose, also suitable as a conventional polish stripper * Can eliminate the need to neutralise * Removes heavy polish build-up without the use of a floor machine * Very fast acting polish stripper

WHERE TO USE
EASY STRIP is recommended for use on thermoplastic, rubber, asphalt, linoleum, sealed wood, sealed cork & wood composition. PLEASE NOTE: For linoleum & rubber floors, we suggest that a check be made to ensure colourfastness.

HOW TO USE
POLISH REMOVAL WITH MOP: Dilute 1:6 parts warm water (4 cupsful per 5lt). Spread solution generously over the floor; leave for 5 minutes then agitate with mop. Leave for a few more minutes, not allowing the solution to dry out. Re-agitate with mop & remove slurry with a wet pick-up machine. Ensure that all the slurry has been removed by rinsing the floor thoroughly with clean water. Allow to dry before applying a polish.
POLISH REMOVAL WITH MACHINE: Dilute upto 1:50 parts warm water (1/2 cupful per 5lt). Apply solution with mop. Leave for a few minutes, machine scrub with a stripping pad. Ensure all the slurry is removed by rinsing with clean water. Allow to dry before applying a polish.
SPRAY STRIPPING: Dilute upto 1:20 with cold water. Spray floor lightly & scrub using a suitable pad & high speed floor machine.

We consider warm water to be between 30oC & 40oC .

COMPOSITION
Contains a blend of amphoteric surfactants, nonionic surfactants, anionic surfactant, ethoxylated amines, sequestering agent & glycol ether.

PACKAGING
4 x 5 litre polythene bottles packed in a cardboard carton